Windows 10 A Media Driver Your Computer Needs Is Missing

Hi, I've got this directly from MS KB article, please read through it and confirm everything is followed as suggested in the resolution & try again. This issue occurs for one of the following reasons: The installation DVD is removed during the setup process. A low-quality DVD was used to create the installation DVD. The speed at which the installation DVD was burned was too fast. The DVD drive cannot read the media.

The ISO file is corrupted. Note: Microsoft has withdrawn all the Windows 7 ISO download links and it's support from their web servers 2 weeks back, so you're not having the benefit of downloading it again FRESH from their server. I suggest you use Recovery media to restore factory OS. Regards Visruth.

I used Rufus to create a bootable USB flash drive (Sandisk Extreme USB 3) (I tried GPT and MBR formats), but I get thrown this message when installing Windows 8 from a USB 3 port: A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.

When I try to boot to my USB drive with Windows 8 I get an error saying 'A media driver your computer needs is missing. Can't install windows 8 'missing media. How to Fix A Media Driver Your Computer Needs is Missing Error windows 10 64bit. From dvd windows 10 64bit Driver link. The Problem: While installing Windows 10 Technical Preview, you get 'A media driver your computer needs is missing' and cannot continue Today, I.

Note: If the installation media for Windows is in the DVD drive or on a USB drive, you can safely remove it for this step. I read that this happens if you inatall from a USB 3 port, so I tried changing to a USB 2 port - same thing. I also reformatted and recreated the flash drive to ensure it wasn't a case of data corruption. Then I tried not using Rufus, and using Disk Management instead. Create new volume, NTFS, then mark as active, and copy the ISO file contents over. This time, it worked - even though I'm installing from a USB 3 port.

So what exactly caused the problem in the first place? From the above it seems like formatting and creating a bootable flash drive using Rufus is the cause. Yet this does not correspond to the error message which implies that Windows has problems reading the data from the drive. And isn't it supposed to be impossible to install via a USB 3 without loading the drivers? So how come I was able to do so? The Windows 8 installation media includes USB 3.0 drivers. USB installation media created using alternative utilities, including the, produce a boot configuration which is incompatible with USB 3.0.

Media produced using the Install Windows 8 button on the page will also work with USB 3.0, as will media created with the and the using Windows PE 4.0 or newer. Is there a way to install the drivers during an installation using a USB created with the Windows 8 USB/DVD Download Tool?

I am also guessing that installing via a DVD circumvents this issue? Is there a way to install the drivers during an installation using a USB created with the Windows 8 USB/DVD Download Tool? I am also guessing that installing via a DVD circumvents this issue? If you are asking whether the creates media compatible with USB 3.0, the answer is yes.

There is no Windows 8 USB/DVD Download Tool, only one for Windows 7, and the media it creates does not support boot from USB 3.0. Another alternative is to manually create the media, follow the steps listed in to create an active partition, then manually copy and paste the files from the ISO into this partition. Because this uses the ISO native files to boot, it is identical to using the DVD, which yes, also supports USB 3.0 during installation.

For reference, the commands are: diskpart list disk select disk clean create part pri select part 1 format fs=ntfs quick active exit List disk lists your system's current disks to allow you to discover the drive number or letter of your flash drive. This number or letter should be used in place of in the following step.

UEFI systems require a disk formatted in FAT32, so in the format step use fs=fat32 rather than NTFS if your system is UEFI. I used Rufus to create a bootable USB flash drive (Sandisk Extreme USB 3) (I tried GPT and MBR formats), but I get thrown this message when installing Windows 8 from a USB 3 port: A media driver your computer needs is missing.

This could be a DVD, USB or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now. Note: If the installation media for Windows is in the DVD drive or on a USB drive, you can safely remove it for this step.

I read that this happens if you inatall from a USB 3 port, so I tried changing to a USB 2 port - same thing. I also reformatted and recreated the flash drive to ensure it wasn't a case of data corruption. Then I tried not using Rufus, and using Disk Management instead. Create new volume, NTFS, then mark as active, and copy the ISO file contents over. This time, it worked - even though I'm installing from a USB 3 port. So what exactly caused the problem in the first place? From the above it seems like formatting and creating a bootable flash drive using Rufus is the cause.

Yet this does not correspond to the error message which implies that Windows has problems reading the data from the drive. And isn't it supposed to be impossible to install via a USB 3 without loading the drivers? So how come I was able to do so? Hi, can you explain better what you really did?

You say that you simply copied the iso file to the usb pen? Did it works? Another alternative is to manually create the media, follow the steps listed in to create an active partition, then manually copy and paste the files from the ISO into this partition.

Because this uses the ISO native files to boot, it is identical to using the DVD, which yes, also supports USB 3.0 during installation. For reference, the commands are: diskpart list disk select disk clean create part pri select part 1 format fs=ntfs quick active exit List disk lists your system's current disks to allow you to discover the drive number or letter of your flash drive. This number or letter should be used in place of in the following step.

UEFI systems require a disk formatted in FAT32, so in the format step use fs=fat32 rather than NTFS if your system is UEFI. Only he did these steps with the console. He removed all partitions from the disk, created a single partition formatted NTFS, marked it as active, then copied the entire contents of the ISO to that partition. I had the same problem and spent half a day trying to get Windows 8.1 installed using a USB thumb drive.

It would load Windows 8.1 setup then inevitably reach the same error every time: the 'Load Driver' titled window that stated 'Missing Media Driver'. I believe that I could've gotten it to work through changing a particular BIOS settings to 'legacy' mode is I found out later in other forums (apologize I don't remember the specifics). Asus Ul50vt Windows 10 Drivers.

But, I ended up simply burning the ISO to DVD, then when booting from DVD it worked perfectly! If you continue having the problem, the likely cause is a corrupt ISO file as stated by Microsoft here: You can get fresh media installation here: If it STILL doesn't work after the new ISO file with a freshly burned DVD then I would be scratching my head too; but hopefully my suggestions help. As WinOutreach2 said, Another alternative is to manually create the media, follow the steps listed in Create a Bootable USB Flash Drive to create an active partition, then manually copy and paste the files from the ISO into this partition. Because this uses the ISO native files to boot, it is identical to using the DVD, which yes, also supports USB 3.0 during installation. For reference, the commands are: diskpart list disk select disk clean create part pri select part 1 format fs=ntfs quick active exit List disk lists your system's current disks to allow you to discover the drive number or letter of your flash drive. This number or letter should be used in place of in the following step.

UEFI systems require a disk formatted in FAT32, so in the format step use fs=fat32 rather than NTFS if your system is UEFI. Thank you very much it really works.

Thank you very much. I have fought this demon for 2 days trying to reinstall the OS after a RAID driver failed and broke my array.

Created the media on 2 different USB3 flash drives using the media creation tool and got the same error. A friend of mine used one of the flash drives I created to install Windows 10 on his machine. But every time I tried to use them, I got this stupid 'media driver missing' error. Long story short, I plugged the drive into another port on the back of the motherboard and it worked flawlessly. Well played, Microsoft.